beautypg.com

Connecting ieee-1394 (firewire, Video devices (cont.), Ieee-1394 device initialization – Toshiba 51H93 User Manual

Page 23: Ieee-1394 device management, Devices

background image

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.

23

Chapter 2: Connecting your TV

Connecting IEEE-1394 (Firewire

) video devices (cont.)

IEEE-1394 device initialization

When you connect a new IEEE-1394 device to the TV and turn
it on, the device immediately announces its presence to the TV
(and other networked IEEE-1394 devices, if any), and the
following device initialization screen automatically appears.

Note: With some devices, it may take up to one minute for this
screen to appear.

1. If you connected your IEEE-1394 device to an analog input

also, use the

yzx •

buttons to select the input in the

“Analog Input Used” field; otherwise, leave it set to
“None.” (See “Using analog-compatible IEEE-1394
devices” at right.)

2. If you want to label the device, highlight EDIT LABEL,

press ENTER, and then use the

yzx •

buttons to input

the label.

3. Highlight SAVE and press ENTER to save the information.

Note:

• The TV may not recognize non-A/V or non-compatible

IEEE-1394 devices; however, these devices may still be available
to other compatible IEEE-1394 devices on the network.

• You may be able to use the TV’s remote control to operate some

compatible IEEE-1394 devices. You must first program the
remote control to recognize the device (see pages 30–33).
If you have an IEEE-1394 Cable box or satellite receiver, you
may need to use the remote control that came with the device.

IEEE-1394 device management

The IEEE-1394 device information is saved permanently in the
TV’s memory. You can edit this device information (for
example, to edit the device name, change the analog input
information, or delete the device information from the TV’s
memory if you no longer use that device).

To edit the IEEE-1394 device information:

1. Press MENU and open the SETUP menu.
2. Highlight INSTALLATION and press ENTER. (A new set

of INSTALLATION menu icons will appear on-screen, as
shown in step 3 below).

Setup

Installation

Sleep Timer

On/Off Timer

Digital Tuner Hold

• • • • • • •

Off

Slide Show Interval

• • •

2 Sec

Convergence

3. Open the DEVICES menu, highlight IEEE-1394

DEVICES, and press ENTER.

Devices

IEEE1394 Devices

TheaterNet Devices

4. Highlight the device you want to edit, and follow the

on-screen prompts.

IEEE1394 Device Management

Analog

Brand

Type

Label

Input

Connected

Exit

Delete All

Brandname VCR

None

Yes

Brandname STB

VIDEO 2

No

Brandname VCR

ColorStr

Yes