beautypg.com

Initiating a burn-in test, Erasing oven settings, Viewing the serial number – TurboChef Technologies 2020 User Manual

Page 36

background image

2 0

Initiating a Burn-In Test

NOTE: Burn-in tests are for manufacturing use
only. DO NOT initiate a burn-in test unless
expressly instructed by TurboChef.

To initiate a burn-in test, Press L2 (Figure 22,
page 17) on screen 2 of the

TEST MODE

.

The burn-in test (Figure 28) runs the oven for 45
minutes to ensure correct oven operation. When
the burn-in test completes, the burn-in complete
screen (Figure 29) will appear. Press any key to
send the oven to the

COOLING DOWN MODE

. If

the burn-in test fails, the applicable error code
will appear and the oven will return to the

COOL

-

ING DOWN

or

OVEN OFF MODE

.

Erasing Oven Settings

To erase oven settings, press L3 (Figure 22, page
17) on screen 2 of the

TEST MODE

to access the

erase screen (Figure 30). From the erase screen,

- Press L1 to erase all menu, belt, and

configuration settings.

- Press L2 to clear the fault counters.
- Press L3 to clear the operational hours.

The oven will ask you to confirm the action
(Figure 31 shows the confirm clear faults screen);
press R3 to confirm or the back/off key to cancel.

CAUTION: Settings, fault counts, and hours
cannot be retrieved once the erase option is

confirmed.

Viewing the Serial Number

The serial number is located at the bottom of
screen 2 of the

TEST MODE

(Figure 22, page 17).

CAUTION: Write this number down
before replacing the I/O control board.
Replacing the I/O control board will erase
this number from the oven’s memory.

If replacing a control board, see page 19 for re-
entering the serial number.

O V E N M O D E S

Continue?

CLEAR FAULTS?

Figure 31: Confirm Clear Fault Counts Screen

BREAKFAST

BELT F
5:00

BELT R
3:20 100%

TOP AIR 80 %

SET

COOKING

OVEN TCC = 475F

475F

BTM AIR 100 %

Burn-In in Progress

Time Left = 42:37

Figure 28: Burn-In Test Screen

ERASE MENUS/BELTS/CONFIGS

CLEAR FAULTS

CLEAR HOURS

Figure 30: Erase Screen

BURN-IN COMPLETE

OVEN TCC = 475F

PRESS ANY KEY TO CONTINUE

Figure 29: Burn-In Complete Screen

L1

L2

L3

R1

R2

R3

L1

L2

L3

R1

R2

R3

L1

L2

L3

R1

R2

R3

L1

L2

L3

R1

R2

R3