Gateway start-up, Accessing the gateway, Gateway start-up accessing the gateway – TANDBERG D13187-03 User Manual
Page 16
16
TANDBERG Gateway
Installation
GW
Accessing the gateway
You may access the gateway by entering the IP-address of the gateway in a standard WEB-browser. You will
then be asked to enter a password. It is not necessary to enter ‘User Name’. The default password for the
gateway is ‘TANDBERG’. Remember that the password is case sensitive.
I
F
YOU
DO
NOT
KNOW
THE
IP-
ADDRESS
,
PLEASE
FOLLOW
THE
PROCEDURE
IN
‘I
NSTALLATION
’, ‘S
YSTEM
C
ONFIGURATION
’.
TIP
T
HE
PASSWORD
CAN
BE
CHANGED
IN
‘S
YSTEM
CONFIGURATION
’,
‘M
ISC
’. S
EE
ALSO
THE
‘C
ONFIGURE
M
ISCELLANEOUS
P
ARAMETERS
’
SECTION
IN
‘C
ONFIGURE
THE
G
ATEWAY
’.
TIP
Gateway start-up
To start the gateway, please make sure that the power cable is connected, and press the power switch button
to ‘1’.
On the front panel of the system the power indicator LED, marked ‘Pwr’, will now turn GREEN.