Toshiba 17WLT46B - Manual (Page 49)

48
Normally the Fine Tuning cursor is
placed next to the left side on the slider
and this is indicated with one arrow.
Setting VCR ( Video Cassette
Recorder ) Mode
• This item can be seen in TV, AV-1, AV-2,
AV-3, S-VIDEO modes.
• If you want to watch a VCR source from
one of these modes, then it will be bet-
ter to set VCR mode “on”. For this, while
the cursor is on this item press the “ ”
or “ ” keys to set it “On”.
• If you want to watch a DVD , then you
must set this item “off”; because DVD is
not a source like a VCR and to see the
picture better, you must set the VCR
mode “Off”.
To Store Settings
• Press “OK” key on the remote control to
store the settings directly.
or,
• Press “ ”, “ ” or “OK” key on Store op-
tion to store Install menu settings.
Programme Menu
• To enter Programme menu directly,
press the " INFO" key in TV mode, or
• Press "M" key, now you are in main
menu. In the main menu, select “Pro-
gram” using “ ” or “ ” key. Then enter
the Programme menu, press “ ” / “ ”
or “OK” key.
0HQX
Moving cursor to four direction you can
reach 20 programmes in the same page.
By scrolling the pages up or down by
pressing the navigation keys you can se-
lect all the programmes in TV mode (ex-
cept the AV mode).
By cursor action, programme selection
is done automatically. In order to select
programme is also possible by using
digit or double-digit key. In this way pro-
gramme selection gets also automati-
cally. The TV Status is changed by the
programme selection too. When using
double-digit key in order to select a pro-
gramme, the Programme Number in TV
Status OSD is displayed in "P --" form,
and by pressing digit keys they are dis-
played in it.
Programme Number is between 00 and
99. Programme Name has a name
string with 4 characters. After autostore
process the Programme Names are set
to:
• Channel search "C-01" or "S-01"
(band and channel number) or name
of the tuned channel if defined.
Q ‚t h€ÃÃÃÃÃÃÃÃQÃÃ!
Ih€r
9ryr‡r
D†r ‡
6ˆ‡‚†‡‚ r
At the bottom of the menu there is a pro-
gramme sort functions section. Each
function is activated by color key (seen
above). Name allows changing the pro-
gramme name. By Delete you can delete
programmes that you decided. Insert
section is for inserting programmes into
another programme spaces. By select-
ing Autostore section, Autostore menu
will be available.
Name:
To change the name of a decided pro-
gramme, that programme is selected
and pressed to the Red key (Name). The
first letter begins to blink on the selected
name. To change that letter “ ” or “ ”
50052932-1552UK (TOSHIBA UK)17 INCH TFT-IDTV-WO WM-dilek p65 11 05 2004 15:30 48