Toshiba 17WLT46B - Manual (Page 36)

35
advanced operation
This is for searching for digital
channels on a single broadcast
frequency. The frequency channel
number (21-68) is entered in the
box at the top left of the screen
and the received signal level and
signal quality can be observed on
the two bar graphs at the bottom.
When “SELECT” key is pressed,
the TV searches that frequency
and display a list of the channels
found. Before returning to the In-
stallation menu.
Hint
The bar graphs of signal quality
and signal level give a good indi-
cation of whether any channels
are likely to be found. If only the
signal level graph shows a high
value then it is likely that an ana-
logue channel occupies that
broadcast frequency. If the signal
quality bar is high as well then it is
a digital frequency and digital
channels will probably be found.
Again, channels which duplicate those already in the channel list are ig-
nored. However, the manual channel search will find all channels on the
broadcast frequency.
When either search is finished, press the “MENU” key to return to normal
broadcast viewing, to watch the new digital terrestrial television channels
found.
Highlight the YES button with the “ “ or “ ” key and press “SELECT” key
to start the automatic search.
50052932-1552UK (TOSHIBA UK)17 INCH TFT-IDTV-WO WM-dilek p65 11 05 2004 15:29 35