Toshiba B-492L - Manual (Page 59)

APPENDIX 4 SYSTEM MODE EO1-33032
A4.5 Printer Parameter Fine Adjustment
A4- 9
A4.5 Printer Parameter
Fine Adjustment
(Cont.)
Back Feed Length Fine Adjustment
With this parameter you can fine adjust the Back Feed Length. With
“<3>ADJUST SET” displayed, press the
[PAUSE] key 3 times.
[FEED] key: Pressing the [FEED] key once causes a –0.5mm
change, down to –9.5 mm.
[RESTART] key: Pressing the [RESTART] key once causes a
+0.5mm change, up to +9.5 mm.
After completing the fine adjustment, press the
[PAUSE] key.
NOTE:
The fine adjustment value
equals the sum of the fine
adjustment values set by the
PC command and this
parameter.
The maximum back feed length
fine adjustment value is
±9.5mm. When the addition of
the values reaches the
maximum, the value remains
unchanged even if subsequent
fine adjustments are made.
Back Feed Length Fine Adjustment
(Example) %$&. $'- PP
[RESTART]
[FEED]
%$&. $'-PP
%$&. $'-PP
%$&. $'-PP
%$&. $'-PP
%$&. $'-PP