Toshiba TDP-MT500 - Manual (Page 7)

7
21. Do not leave thermal-paper
documents or easily damaged
items on top of the projector
or near the air exhaust.
The heat from the projector could
erase the information on the thermal
paper, or cause damage or warping.
Also, when you touch a metal object
put near the air exhaust, it could be
hot and burn you.
22. Unplug the power plug after
you are finished using the
projector.
Turn off the POWER button to bring
the projector into its standby state with
the light-source lamp off. Then, wait
about 2 minutes and turn off the main
power switch, and be sure to unplug
the power plug for safety. Wait about 2
minutes while the projector is in
standby, because during this time the
intake/exhaust fan is operating to cool
down the light-source lamp. Turning off
the main power switch or unplugging
the power plug immediately
after use may harm the projector.
IMPORTANT SAFETY INSTRUCTIONS