Toshiba TDP-MT500 - Manual (Page 39)

39
• The maximum resolution of this projector is 1024 x 576 dots. It is not possible to obtain more than the maxi-
mum resolution for projected images.
• If picture images of a connected computer have a resolution and sync frequency other than those
indicated in the above table, they may be projected by changing the resolution and frequency within
the computer.
• Because XGA60 signals and SVGA60 signals are in conformity with HTPC, they are projected with an
emphasis on picture quality, and the projected images become a little dark. The other PC input signals
are projected with an emphasis on brightness.
• 1080i represents Hi-Vision.
• COMPONENT 1,2 inputs do not project RGB signals.
• The DVI-ANALOG input does not project chrominance signals.
• If signals are out of specification input, they may not be projected properly.
• If VGA60 signal outputs at the start-up of the computer, the projected image may not be displayed properly-for
example, the position of the displayed image may be shifted. However, this is not a malfunction (non-
compliant signal).
• DVI input of 480i and 576i may not be displayed correctly.
Type of connectable signals
Input signal Screen size
Signal Resolution Horizontal sync Vertical sync REAL display
representation (H x V) frequency (kHz) frequency (Hz) (H x V)
480i – 15.73 59.94 720 x 480
576i – 15.63 50.00 720 x 576
480p – 31.47 59.94 720 x 480
576p – 31.25 50.00 720 x 576
720p50 – 37.50 50.00 1024 x 576
720p59 – 44.96 59.94 1024 x 576
720p60 – 45.00 50.00 1024 x 576
1080i25 – 28.13 25.00 960 x 540
1080i29 – 33.72 59.94 960 x 540
1080i30 – 33.75 60.00 960 x 540
VGA 640 x 400 31.47 70.09 640 x 400
VGA 640 x 480 43.27 85.01 640 x 480
SVGA 800 x 600 37.88 60.32 800 x 600
SVGA 800 x 600 46.88 75.00 800 x 600
SVGA 800 x 600 53.67 85.06 800 x 600
XGA 1024 x 768 48.36 60.00 1024 x 768
XGA 1024 x 768 60.02 75.03 1024 x 768
XGA 1024 x 768 68.68 85.00 1024 x 768
SPECIFICATIONS
Terminals
PIN No. NAME I/O
1 – –
2 – –
3 RXD OUT
4 – –
5 – IN/OUT
6 – IN
7 TXD –
8 – –
SHELL GND –
RS-232C terminal
(8P)
1 2
6 8 SHELL
5 3
DVI terminal
(DVI-D)
PIN NO. STATUS PIN NO. STATUS
1 DATA 2– 13 –
2 DATA 2+ 14 +5V Power
3 DATA 2 Shield 15 GND
4 – 16 Hot Plug Detect
5 – 17 DATA 0–
6 DDC Clock 18 DATA 0+
7 DDC Data 19 DATA 0 Shield
8 – 20 –
9 DATA 1– 21 –
10 DATA 1+ 22 Clock Shield
11 DATA 1 Shield 23 Clock+
12 – 24 Clock–
17 24
16 9
8 1
DVI terminal
(DVI-A)
C3 C4
C5
C2 C1
17
24
9
8
1 16
PIN NO. STATUS
C1 ANALOG RED
C2 ANALOG GREEN
C3 ANALOG BLUE
C4 H Sync
C5 GND
6 DDC Clock
7 DDC Data
8 Analog Sync
14 +5V Power
15 GND
16 Hot Plug Detect