Transcend Information III User Manual

Page 37

4-6

HAPTER

4: L

OADING

ETWORK

RIVERS

Figure 4-2 AutoLink Information Screen

Figure 4-3 Main Menu

ESC=Cancel

This option will install a complete DOS ODI client.

[ENTER]=Continue
[ESC]=Exit Program

3Com's auto installation software (AutoLink) automatically configures your
adapter and workstation for use as a NetWare client. To use AutoLink:

* Have only one 3Com Bus Master adapter installed
* Use NetWare v2.X, v3.1X, or v4.X as your network operating system
* Have DOS on the client being installed

AutoLink edits your AUTOEXEC.BAT and CONFIG.SYS files and saves the old
versions. Select General Information/Release Notes in the main menu for
information on AutoLink server support. To manually set up your adapter
or for information/drivers for other NOSs, use the options under Standard
Installation and Configuration in the main menu.

EtherDisk-3C59X Fast EtherLink/EtherLink III Bus Master Adapter Family v.X.X

ESC=Cancel

F1=Help

M A I N M E N U

Program & information for configuring/testing/troubleshooting adapters

[ENTER]=Execute Function
[

↑↓

]=Scroll

[F1]=Help [ESC]=

Auto Installation with Configuration (AutoLink)
NetWare DOS ODI Client

EtherDisk-3C59X Fast EtherLink/EtherLink III Bus Master Adapter Family v.X.X

Standard Installation and Configuration
Network Drivers ...
Configuration/Diagnostic/Troubleshooting ...
General Information/Release Notes