Transcend Information III - Manual (Page 32)

4
L
OADING
N
ETWORK
D
RIVERS
This chapter describes how to load the network drivers
required to let the 3C592 EISA adapter operate with your
network operating system. Figure 4-1 shows an overview of
these procedures.
Figure 4-1 Overview of Loading Network Drivers
If you are running NetWare 2.x, 3.1x, or 4.x, you can use
3Com’s AutoLink

auto installation feature, which
automatically loads all the NetWare DOS ODI client software,
including drivers. Follow the instructions in the section
“Loading NetWare ODI Drivers.”
If you are running Windows 95, you must import the driver
from the EtherDisk diskette. Follow the instructions in the
section “Loading Windows 95 Drivers” later in this chapter.
1
Locate network drivers.
2
Access DOS.
3
Load the drivers.
A
B
NetWare
(Client/server)
Windows 95 Non-NetWare
(NDIS or other)