Toshiba 50HM66 - Manual (Page 8)

8
HM66 (E/F) Web 213:276
Chapter 2: Using the remote control
Learning about the remote control
The buttons used for operating the TV only are described here.
For a complete list of the remote control’s functions, see the
remote control functional key chart (- page 10).
Note: The error message “NOT AVAILABLE” may appear if
you press a key for a function that is not available.
1 POWER turns the TV on and off. Press p to turn on the
TV. The blue LED indicator on the TV front will be
illuminated. Press p again to turn off the TV.
Note: The Quick Restart™ setting will affect the amount of
time it takes for the picture to appear when you turn on the
TV (
- page 20).
2 FREEZE freezes the picture. Press again to restore the
moving picture.
3 SLEEP accesses the sleep timer ( - page 39).
4 PIC SIZE cycles through the five pictures sizes: Natural,
TheaterWide 1/2/3, and Full (
- page 27).
5 Channel Numbers (0–9, –/100) directly tune
channels. The “–” button is used to tune digital channels
(
- page 26) or to display the favorite channel list
( - page 19).
6 INPUT selects the video input source ( - page 23).
7 CH Bb cycles through programmed channels when no
menu is on-screen (
- page 17) and functions as page up/
down when a menu is on-screen.
8 VOL + – adjusts the volume level.
9 HOME (~) accesses the home function of the Channel
Browser™ feature (- page 26).
10 RECALL displays TV setting information on-screen
(- page 40).
11 CH RTN returns to the last viewed channel (- page 26).
12 MUTE reduces or turns off the sound (- page 32).
13 3 C / # c While watching TV, these buttons open the
Channel Browser™ banner and tune to the previous/next
channel in the channel history (- page 24). (Also see
“Arrow buttons”.)
14 Arrow buttons ( BbC c) When a menu is on-screen,
these buttons select or adjust programming menus. (Also
see 3 C / # c.)
15 FAV Bb tunes to the next higher/lower favorite channel
(- page 19).
16 ENTER activates highlighted items in the main menu
system.
17 MENU accesses the main TV menu system ( - pages 14
and 15).
18 EXIT closes on-screen menus.
19 MODE SELECT Switch switches between TV,
CABLE/SAT, DVD, and VCR modes ( - page 9). Set to
“TV” to control the TV.
HM66_EN.book Page 8 Thursday, February 23, 2006 2:49 PM