Selecting the color temperature, Selecting the lamp mode, Mode picture quality – Toshiba 50HM66 User Manual
Page 42
42
HM66 (E/F) Web 213:276
Chapter 6: Using the TV’s advanced features
Selecting the color temperature
You can change the quality of the picture by selecting from
three preset color temperatures (cool, medium, and warm), as
described below.
To select the color temperature:
1
Press Y and open the Video menu.
2
Highlight Advanced Picture Settings and press T.
3
In the Color Temperature field, select the mode you
prefer (Cool, Medium, or Warm).
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature mode, the picture mode automatically
changes to Preference in the Picture Settings menu.
Selecting the lamp mode
You can select either the High Bright or Low Power lamp
mode.
•
The High Bright mode is useful when additional picture
brightness is desired (such as in a bright room).
To select the lamp mode:
1
Press Y and open the Video menu.
2
Highlight Advanced Picture Settings and press T.
3
In the Lamp Mode field, select High Bright or Low
Power, whichever you prefer.
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you set the lamp mode to Low Power, each time
you turn on the TV, the lamp will start out in High Bright
mode but will switch to Low Power mode after a short
period of time. You may notice a change in screen
brightness when this happens. This is normal and is not a
sign of malfunction.
Mode
Picture Quality
cool
blueish
medium
neutral
warm
reddish
Done
Cool
Game Mode
Off
Lamp Mode
Low Power
Reset
Color Temperature
Dynamic Contrast
On
ANT 1
Advanced Picture Settings
MPEG Noise Reduction
Low
CableClear
Auto
CH RTN
EXIT
ENTER
Picture Settings
Advanced Picture Settings
Theater Settings
Video
Back
Exit
Navigate
Select
Done
Advanced Picture Settings
ANT 1
Dynamic Contrast
On
MPEG Noise Reduction
CableClear
Auto
Color Temperature
Cool
Game Mode
Off
Lamp Mode
Low Power
Reset
Low
HM66_EN.book Page 42 Thursday, February 23, 2006 2:49 PM