Toshiba 50HM66 - Manual (Page 5)

5
HM66 (E/F) Web 213:276
Chapter 1: Introduction
TV front and side panel controls and connections
1
2
9
10
3
4
5
6
8
7*
Side panel
Right side of TV Front of TV
Control panel
1 Remote sensor (behind the screen) — Point the remote
control toward this area of the TV screen. See “Remote
control effective range” (- page 7).
2 Blue, Yellow and Green/Red LEDs
See “LED indications” (- page 46) for additional
information.
3 POWER — Press to turn the TV on and off.
If the TV stops responding to the controls on the remote
control or TV control panel and you cannot turn off the
TV, press and hold the POWER button on the TV control
panel for 5 or more seconds to reset the TV.
4 CHANNEL U u — When no menu is on-screen, these
buttons change the channel (programmed channels only;
- page 17). When a menu is on-screen, these buttons
function as up/down menu navigation buttons.
5 VOLUME + – — When no menu is on-screen, these
buttons adjust the volume level. When a menu is on-
screen, these buttons function as left/right menu
navigation buttons.
6 INPUT — Repeatedly press to change the source
you are viewing (ANT 1, VIDEO 1, VIDEO 2,
ColorStream HD-1, ColorStream HD-2, HDMI 1,
HDMI 2, ANT 2).
7 *MENU (ENTER) — Press to access the menu system
(- pages 14–15). When a menu is on-screen, the MENU
button on the TV’s side control panel functions as the
Enter button.
8 ARROWS BbC c — When a menu is on-screen, these
buttons function as up/down/left/right menu navigation
buttons.
9 EXIT — Press to instantly close an on-screen menu.
10 VIDEO-2 IN — The side panel A/V connections are
referred to as “VIDEO 2” and include standard A/V
connections plus optional S-video.
HM66_EN.book Page 5 Thursday, February 23, 2006 2:49 PM