Tally Genicom 6600 - Manual (Page 207)

Barcode Command Parameters
207
Magnification Value (X-Factor)
Optional parameter that specifies a horizontal expansion amount (X-Factor)
for the barcode output. When used this value causes an increase in the
physical size of the barcode. Table 39 lists the expandable barcodes and
allowable expansion factors.
Hn (Height Expansion)
Optional parameter that specifies height expansion of barcode and human
readable character output. Adjustments are made in 0.1 inch increments.
The valid range of selections is 4 to 99 (0.4 to 9.9 inches). The default value is
0.9 inches.
Enter: H followed by the desired expansion amount.
Examples:
H1 = Expansion of 0.1”
H20 = Expansion of 2.0”
H45 = Expansion of 4.5”
Table 39. X-Factor VS Barcode Style
ENTER Barcode Style
X-Factor C3/9 C128B C128C I2/5
MSI A, B, C,
& D
X1
X1A
X1B
X1.5
X2
X2A
X3
X4