Tally Genicom 6600 - Manual (Page 163)

STARTDATA (Incremented Field)
163
The following examples show various ways the STEPMASK may be set up
and the result each setup has on a field of data.
Example Key:
SM = STEPMASK
SD = STARTDATA
RPT = SD Repeat Count
RST = SD Reset Count
Example 1: Incremental, linked alphanumeric Subfields: Default RPT (1) and
RST (0)
Example 2: Non-incremental position with nonlinked subfields: Default RPT
(1) and RST (0)