Toshiba TLP-B2U - Manual (Page 54)

CONTENTS 54
Maintenance
If there is some problem inside the
projector, the indicators light up or flash.
Trouble indications
The power does not come on.
→
Malfunction of the unit.
• Unplug the power cord and call the dealer.
Note
Before attempting any maintenance, unplug the power cord.
TEMP indicator
LAMP indicator
ON indicator
ON LAMP TEMP
ON LAMP TEMP
(OFF)
or
Lit
(red)
ON LAMP TEMP
Lit
(red)
ON LAMP TEMP
Lit
(red)
Lit
(red)
Lit
(red)
ON LAMP TEMP
The lamp turns off or does not light up.
→
The lamp’s end, or malfunction of the unit.
• Lamp’s life length is over, replace the lamp with new one.
• Unplug the power cord and call the dealer.
The power turns off or does not come on.
→ The inside is too hot, or the projector has been working in
an area of high temperature.
• Place the projector correctly so the intake and exhaust
fans’ holes are not covered.
• Turn the projector off, and leave it for a while, and turn it
on again.
• Clean the air filter.
The power turns off or does not come on.
→
Trouble with the intake fan.
• Unplug the power cord and call the dealer.
The power turns off or does not come on.
→
Trouble with the exhaust fan.
• Unplug the power cord and call the dealer.
Lit
(red)
Flashing
(red)
ON LAMP TEMP
Lit
(red)
Flashing
(orange)