Toshiba TLP-B2U - Manual (Page 52)

CONTENTS 52
Adjustments
Preparation
1 Project a picture on the screen as explained in the step “Projection on the screen”. 25
Reset, Status display (Data setting)
You can display the status, return to the factory
reset mode and reset to the standard setting for
keystone distortion correction.
1 Display the full menu screen.
Press MENU.
When the quick menu is displayed, select “FULL MENU” by
pressing / and then press ENTER.
Select “ ” by pressing / and then
press ENTER.
2
3 Select the setting item (Status display, Factory
reset mode, Keystone reset) by pressing /
and then press ENTER.
Status display:
Display the current operation status.
Current input source
Signal horizontal resolution
Signal vertical resolution
Signal horizontal frequency
Signal vertical frequency
Continued
Data setting
Factory reset mode
Keystone reset
Status display
Picture adjustment
Contrast
Status display
Input RGB
Horizontal resolution
Vertical resolution
Horizontal frequency
Vertical frequency
MENU ENTER INPUT
MENU
MENU
ENTER
ENTER
ENTER
ENTER