Adjusting image (continued) – Toshiba TLP-B2U User Manual

Page 39

CONTENTS

Adjustments

Adjusting image (Continued)

Adjust the item by pressing / .

If you adjust other setting item, return to step 3.

–: +:
Keystone:

(–) To reduce the lower width.
(+) To reduce the upper width.

Phase:

To reduce flickers.

H-position:

To shift the image to the left (–), to the right (+).

V-position:

To shift the image down (–), to up (+).

Clock:

To remove vertical stripes.

At this time, if you press the ENTER button, the screen
changes to display the item selected only. Pressing the
MENU button will return to the previous setting screen.

Press MENU several times until the full
menu screen disappears.

Notes

• During adjustments of “H-position” or “V-position”, the image may not be projected

properly.

• While using, an aberration of the phase may occur. In that case, adjust “Phase” again.
• Depending on the input signal, the adjustment bar when adjusting the clock may not

move in full scale.

• Pressing the MENU button will return to the previous setting screen.
• You can adjust the “H-position” and “V-position” for every input sources (RGB, Video).
• You can not adjust “Phase” and “Clock” at Video input.
• The value(s) adjusted and/or setting(s) is memorized.
• Press the RESET button, the menu screen disappears.

ENTER

Keystone

ENTER