Toshiba TLP-B2U - Manual (Page 45)

CONTENTS 45
Adjustments
Setting the input signal (Continued)
Change the selection by pressing / .
Picture mode:
Bright: To set the picture with its brightness priority.
True color: To set the picture with its picture quality
(color) priority.
Video mode:
Auto: To determine the kinds of video signal
entered automatically. If not determined
properly, select the kind of signal among the
signals shown below.
NTSC, NTSC4.43, PAL, PAL-N, SECAM, PAL60, PAL-M
No signal background:
TOSHIBA logo: To set TOSHIBA logo on the background at
no signal status.
Blue background: To set blue screen on the background at no-
signal status.
No signal power off:
OFF: The power does not turn off automatically
even if the no signal status continues.
5 minutes : The power turns off automatically if the no
signal status continues for approx. 5 min.
4
Continued