Toshiba TLP-B2U - Manual (Page 17)

CONTENTS 17
Installation and
connection
Place the projector on a steady, level surface such as a table.
To obtain proper screen projected, place the projector so that the projecting light hits the screen squarely.
Floor-mounted projector placement (Continued)
Top view
Screen
90
°
Screen
90
°
Lens
a
b
Side view
Screen
90
°
a: Distance between the lens
and the screen
b: Distance between the lens
height and the bottom of
projection area
Projection size
(inches)
25
40
60
80
100
150
200
250
b (cm)
3.5
6.1
9.1
12.2
15.2
22.9
30.5
38.1
Minimum
(At maximum zoom)
–
1.55
2.35
3.14
3.94
5.94
7.93
9.93
Maximum
(At minimum zoom)
1.15
1.88
2.84
3.8
4.76
7.17
9.57
–
a (m)
• The values are approximations.
1
2
Point the lens straight at the center of the screen as above.
Determine the screen size projected on the screen.
The projection size depends on the distance between the lens and the screen.
Adjust the projection size by changing the distances as shown below.
Place the projector horizontally so that the projecting light hits the
screen squarely.
Continued