Toshiba H9 - Manual (Page 40)

32 H9 ASD Installation and Operation Manual
LED/LCD Display Installation Note
When installing the LED/LCD display module of the EOI ensure that the left side of the display is
inserted first with the top and bottom catches (see Phillips screws at underside of display) securely in
place. This ensures the proper alignment and electrical connection of the CNX connector of the LED/
LCD display module PCB. Then gently hold the display in place while securing the Phillips mounting
screw.
If improperly seated, the periphery of the LED/LCD display module will not be flush with the front panel
surface and the unit will not function properly.