Toshiba WX800U - Manual (Page 92)

92
Chapter 10: Appendix
Searching for a device code
If you do not know the device code for a particular
device, you can view each available code for that device
mode and sample the functions to find the code that
operates the target device.
1
Press a mode select button on the remote.
2
While holding down , press 8, 5, 0, 0. The
remote control enters program mode.
3 Point the remote at the target device and press p,
1, z, < or S. Some keys are ignored if they are not
applicable to a specific device mode.
4 If the device responds to the remote control:
Press
to store the device code. The mode select
button blinks twice. The remote exits program
mode.
5 If the device does not respond to the remote control:
Press B. Press p. Repeat this step until the device
responds to the remote. Press
.
Note: When a search cycle is completed, the mode select
button blinks 3 times. The remote displays each available
code again. If no key is pressed within 10 seconds, the
remote exits program mode and returns to the previous
code.
Locking the volume keys
By default, the remote’s volume keys (z, Z, and
MUTE) are locked to the TV device mode.
See “Operating other devices” (- p. 91).
To lock the remote’s volume keys to a specific mode:
Example: CABLE/SAT mode
1
Press CABLE/SAT.
2
While holding down the button, press 8, 0, 0, 0.
3
Press z. The CABLE/SAT mode select button
blinks 2 times (locked).
The remote’s volume keys now operate the volume
of the device associated with the CABLE/SAT
mode, even when CABLE/SAT is not the current
device mode.
To unlock the remote’s volume keys:
1
While holding down , press 8, 0, 0, 0.
2
Press Z. The CABLE/SAT mode select button
blinks 4 times.
The CABLE/SAT mode is unlocked.
Clearing the remote’s programming
You can clear all programmed remote control features
not related to “Device code setup” and reset the volume
lock to the TV device mode.
While holding down , press 8, 9, 0, 0. The mode
select button blinks 4 times.
Resetting to the factory default
You can clear changed manufacturing features.
While holding down , press 8, 9, 0, 1. The mode
select button blinks 4 times.
State Meaning
Locked
The remote operates the TV’s
volume, even when the TV is not
the current device mode.
Unlocked
The remote operates the volume of
the device associated with the
current device mode.
Each device mode has its own
volume (if the device ID has
volume data).
Locked to a specific
device mode
The remote operates the volume of
the device associated with the
locked mode, even when the locked
mode is not the current device
mode.
WX800U_EN.pdf 92 2010/08/11 10:14:54