Toshiba WX800U - Manual (Page 44)

44
Chapter 6: Basic features
Adjusting the amplifier’s audio
Using the TV’s remote control, you can adjust or mute
the sound volume of your amplifier. First, set the
MODE SELECT switch on the remote control to TV.
•z Z adjust the volume level.
•
turns off the sound.
1 Y > PREFERENCES > REGZA-LINK Setup >
.
2
Press B or b to highlight Speaker Preference.
3
Press C or c to select Amplifier.
Note: Confirm that a connected REGZA-LINK ® device
(such as DVD player, etc.) is selected for the Amplifier
input source.
Note:
• You can also use this function when the amplifier is
connected to the TV’s DIGITAL AUDIO OUT terminal
(not HDMI connection). Select a digital audio input mode
on the amplifier.
• These functions depend on the device connected.
Other REGZA-LINK ® functions
When Enable REGZA-LINK and all items in the
REGZA-LINK Setup
menu are set to On, the following
functions will be enabled.
Note: When you turn on the amplifier, change its input
source, or adjust the sound volume, the sound will be
output from the amplifier’s speakers even if TV Speakers
has been selected. Turn the TV off and on again to output
the sound from the TV speakers.
To set the REGZA-LINK ® Setup:
1 Y > PREFERENCES > REGZA-LINK Setup >
.
2
Press B or b to highlight Enable REGZA-LINK.
3
Press C or c to select On.
Note: If you set Enable REGZA-LINK to Off, the other
items under REGZA-LINK Setup will be grayed out.
4
Press B or b to select a REGZA-LINK setup item.
Press C or c to select On or the desired mode.
• TV Auto Power: On/Off
• Auto Standby: On/Off
• Amplifier Control: On/Off
• Speaker Preference: TV Speakers/Amplifier
Connecting a Toshiba PC
compatible to REGZA-LINK
®
This feature automatically sets suitable widescreen
formats and picture preferences when the TV is
connected to a Toshiba PC compatible with REGZA-
LINK
® .
Note: This feature depends on the equipment connected.
Item Description
TV Auto
Power If a REGZA-LINK ® device is turned on,
the TV turns on automatically.
Auto Standby
If the TV is turned off, the TV will send a
message to turn off all of the REGZA-
LINK devices connected to the TV.
Amplifier
Control
If Amplifier Control is set to On, you can
adjust the sound volume or turn off the
sound using the remote control.
Speaker
Preference
From this item, you can set your audio
output preference to the TV speakers or
the amplifier. When this item is set to
Amplifier
, the remote control can be used
to adjust or mute the volume of the
audio. This item will be not available and
set to TV Speakers automatically unless
a REGZA-LINK
® compatible audio
receiver is connected.
O K
O K
WX800U_EN.pdf 44 2010/08/11 10:14:52