Oki 84 - Manual (Page 52)

Handbook
|
45
Overview
Sending a Fax to
Multiple Locations
(Broadcasting)
This function is also available through JetSuite Pro;
see the JetSuite Pro User’s Guide for details.
Your MFP’s broadcasting feature allows you to send a
document to many different locations at the same time. For
each broadcast operation, you can select as many programmed
One Touch keys, groups, and Auto Dial codes as you like.
You can also manually enter up to ten telephone numbers
on the numeric keypad.
Performing a Broadcast Operation
1 Load your documents.
2 Select a location. Refer to the instructions below.
To Select Using Do This
A One Touch key Press the One Touch key.
An Auto Dial number Press the Auto Dial key, then enter
the two digit Auto Dial number on
the numeric keypad.
A group Using the numeric keypad, press
the # key, then enter the number of
the group.
A number dialed on the Dial the number as you would on a
numeric keypad normal telephone, then press start.
3 Select another location within 3 seconds after step 2.
4 Repeat steps 2 and 3 as often as necessary to continue
selecting locations.
5 When you are finished selecting locations, press the Start
key, ENTRY IS OK? displays.
6 Press Start. Your MFP begins scanning the document and
dialing the numbers.
To make corrections
1 At step 5, when ENTRY IS OK? displays, press the No ᮣ
key. PRINT ENTRY REPORT? displays.
2 Press the Yes
ᮤ key. PRINTING displays and the report