Oki 84 - Manual (Page 40)

Handbook
|
33
3 Your MFP grips the documents, and pulls the bottom page
into the machine.
If necessary, use the Transmit Resolution or Yes
ᮤ key to
set the resolution of your document.
Document Type Resolution Resolution
To Use of Scan
Normal office STD (Standard) 200 x 100 dpi
documents
Documents with small FINE or EX.FINE FINE: 200 x 200 dpi
type or other fine details EX. FINE 200 x 400 dpi
Documents with photos PHOTO 300 x 300 dpi
or many shades of gray
4 If necessary, use the Type of Original/No
ᮣ key to set the
level of contrast in your document.
Document Type Contrast to Use
Documents with normal contrast NORMAL
(default setting)
Documents that are too light LIGHT
Documents that are too dark DARK
5 Your Documents are now ready for faxing or copying.
Sending a Fax to a Single Location
1 Load your documents.
2 Select a location. Refer to the instructions below.
To Dial Using Do This
A One Touch key Press the One Touch key.
An Auto Dial number Press the Auto Dial key, then enter
the two digit Auto Dial numbers
on the numeric keypad.
The numeric keypad Dial as you would on a normal
telephone. If you make a mistake,
press theYes
ᮤ key back up one
space and re-enter the number.
An external telephone Pick up the handset of your
external telephone and dial the
number of the machine you wish
to transmit to. If the receiving fax
machine is in automatic reception
mode, you will hear a high-pitched
tone. If a person answers the
phone, ask them to press the Start
key on their fax machine.
3 If necessary, press the Start key to begin the transmission.