Oki RT322POS User Manual
Page 49

– 45 –
(3) ESC/POS mode
Switch
Function
ON
OFF
1-1
Command emulation
Always OFF
1-2
Command emulation
Always OFF
1-3
Should not be changed (Should be set to on)
1-4
Sensor adjustment
Invalid
Valid
1-5
Pin #31 (INIT) reset signal
Valid
Invalid
1-6
Handshaking conditions
(conditions for BUSY)
Offline or receive
buffer full
Receive buffer full
1-7
ASB function *1
Valid
Invalid
1-8
Should not be changed (Should be set to on)
1-9
Graphic adjustment
203 DPI
180 DPI
1-10
Should not be changed (Should be set to on)
*1 ASB Function
When this function is enabled, status information is automatically sent to the host whenever the
printer status changes (such as when the cover is opened, paper runs out, or an error occurs).
For information about automatic status information transmission, refer to the separate Program-
mer's Technical Reference manual (Star Line Mode, Star Page Mode, and ESC/POS Mode).
*2 NSB Function
When this function is enabled, status information is sent automatically when the printer con-
nects the printer port (TCP#9100).
For information about automatic status information transmission, refer to the separate Program-
mer's Technical Reference manual (Star Line Mode and Star Page Mode).
DIP-SW 2
Switch
Function
ON
OFF
2-1
Always ON
Should be set to on
2-2
2-3
2-4
The factory settings of DIP switch are all on.