Auto cr, Auto lf (line feed), Auto select – Oki 391 User Manual
Page 74: Centering, Print suppress
74
Microline 390/391 Turbo
|
Menu Settings Table (Continued)
For a complete explanation of each menu item, refer to “Using Your Printer, Menu Mode, Explanations of Menu Items.”
The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in
bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.
Group
Item
Settings (Defaults are set in bold italic)
Set-Up
Operator Panel Function
Full Operation, Limited Operation
(continued)
Reset Inhibit
No, Yes
Print Suppress Effective
Yes, No
Auto LF
No, Yes
Auto CR+
No, Yes
SI Select Pitch (10 cpi) *
17.1 cpi, 15 cpi
SI Select Pitch (12 cpi) *
20 cpi, 12 cpi
Time Out Print
Valid, Invalid
Auto Select
No, Yes
Graphics Speed
Low, High
Centering Position
DEFAULT, MODE 1, MODE 2
* Appears only when the IBM emulation is selected.