Oki 391 - Manual (Page 49)

|
User’s Guide: English 49
Changing the Forms Tear-Off Setting
The default setting for Forms Tear-Off is OFF.
32T-FP.eps
QUIET PARK TEAR FF/LOAD LF SEL
SEL
POWER ALARM MENU
GROUP EXIT ITEM SET PRINT
MENU SHIFT TOF Micro Feed
Up
Micro Feed
Down
To change the Forms Tear-Off setting:
1 Press SHIFT (2) + SEL (1).
2 Press GROUP (3) until one of the following lines appears,
depending on which paper feed you are using
REAR FEED Form Tear-Off OFF
BOTTOM FEED Form Tear-Off OFF
3 Press ITEM (4) until Form Tear-Off appears in the second
column.
4 Press SET (5) until the time interval you wish to select
appears in the third column.
5 Press SHIFT (2) + SEL (1) to exit Menu Mode and save the
setting.
! The status of the Forms Tear-Off menu setting affects
how you set the Top of Form.
! If the software package you are using “pauses” while
sending data to the printer, Forms Tear-Off may be
activated (if it is enabled through the Menu). The pause
must be for two seconds or more. No data is lost. Uneven
print registration will occur due to the paper movement.
If the problem occurs, use the menu to turn off Forms
Tear-Off.
! DO NOT use Forms Tear-Off with labels or multi-part
forms!
! Forms Tear-Off CANNOT be used when the optional
pull tractor is engaged.
2 1 3 4
5