Printing, Receive buffer size, Bi-directional – Oki 391 User Manual
Page 73: Uni-directional, Control, top feed, Top feed, Margin, bottom, Memory, receive buffer size, Setting in the printer menu, Paper out override
|
User’s Guide: English
73
Menu Settings Table (Continued)
For a complete explanation of each menu item, refer to “Using Your Printer, Menu Mode, Explanations of Menu Items.”
The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in
bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.
Group
Item
Settings (Defaults are set in bold italic)
Top Feed
Line Spacing
6 LPI, 8 LPI
Bottom Margin
Valid, Invalid
Page Width (wide model only)
13.6", 8"
Page Length
11", 11-2/3", 12", 14", 17", 3", 3.5", 4", 5.5", 6", 7", 8", 8.5"
Wait Time
500 ms, 1 sec, 2 sec
Page Length Control
By MENU Setting, By Actual Page Length
Set-Up
Graphics
Bi-directional, Uni-directional
Receive Buffer Size
8 K, 1 Line, 23K
Paper Out Override
No, Yes
Print Registration
0, set in 0.05 mm increments: press SEL to shift registration to the left;
press SHIFT + SEL to shift registration to the right.