Oki 391 - Manual (Page 21)

|
User’s Guide: English 21
• If you’re using an extension cord or power strip with the
printer, make sure that the total of the amperes required by
all the equipment on the extension is less than the
extension’s rating. Generally, the total ratings of all
equipment plugged into any one power line should not
exceed 15 amperes. Don’t exceed this unless you know
that the power line your equipment is plugged into has a
rating above 15 amperes.
• Protect your printer from overheating. Make sure the
openings on the printer are not blocked. Do not put the
printer on or near a heat source, such as a radiator or heat
register. If you put the printer in any kind of enclosure,
make sure it is well ventilated.
Installation Overview
To install your new printer, follow the instructions in this
section. You must complete these steps for your printer to
operate properly.
If you have purchased an accesssory (option) for your printer,
refer to the documentation you received with that accessory
for installation instructions.
Installation Location
• Place your printer on a firm, solid surface.
• Allow enough space on each side of the machine to easily
access the platen knob and the various paper feed paths.
• Make sure a power outlet is available nearby.