Olympus OM-2 - Manual (Page 65)

FLASH PHOTO GROUP UNITS
Electronic Flash T32
The T32 is the center of the
modular OM Flashphoto system.
Used alone on the camera, the
built-in bounce mechanism
allows the flash surface to be
tilted 90° up and 15° down. This
angle range can be further ex-
tended when the T32 is slipped
into the Power Bounce Grip 2.
Electronic Flash T20
Extremely compact and light-
weight. Like its sister unit T32,
the T20 is an energy-saving, fully
automatic system flash unit capa-
ble of TTL Auto, normal Auto
and manual flash and provides
the flash charge/correct exposure
indication in the OM camera
viewfinder (but with no built-
in bounce mechanism). Operates
T10 Ring Flash 1
Designed principally for use with
the OM System macro lenses, this
unit provides full and even flash
illumination at working distances
far closer than possible with
other flash units. Operates in
conjunction with the T Power
Control 1.
Operates on four 1.5V AA (self-
contained) or C batteries (inside
bounce grip) including Ni-Cd, or
AC house current. 104 x 81 x
70mm (4.1"x3.2"x 2.8"),320g.
(11.3 oz.) less batteries.
on two 1.5V A A (self-contained)
or four 1.5V C (inside bounce
grip) including Ni-Cd, or AC
house current. 77 x 68 x 57mm
(3" x 2.7" x 2.2"), 160g. (5.6
oz.) less batteries.
Ring Cross Filter POL
A cross-polarizing filter which
minimizes direct reflections from
the T10 Ring Flash 1 for highly
reflective subject matters.
64