Olympus OM-2 - Manual (Page 10)

LOADING THE FILM
Pull the rewind knob up
and open the camera back.
Insert a film cartridge into
the film chamber and push
the rewind knob back.
Insert the film leader into
one of the slots in the film
take-up spool.
Turn the advance lever so that the film perfora-
tions engage the sprocket teeth.
Close the camera back until it clicks.
Make sure the selector lever is in the OFF posi-
tion.
NOTE: Fold out the rewind crank and rotate it
clockwise slightly to remove any slack in the film.
Then if the rewind crank rotates as you turn the
advance lever, the film is properly advancing.
9