Winder 2 operation – Olympus OM-2 User Manual

Page 42

WINDER 2 OPERATION

Attaching the Winder 2

Remove the motor drive socket cap.

Pull up and rotate the mode selector to the

"OFF" position.

Remove the M. 6V Battery Holder 1 from in-

side the winder, insert four 1.5V penlight (AA)

size batteries into the battery holder, and put

it back into the compartment. Insert the guide

pin into the guide pin hole on the camera base

plate. Turn the clamping screw clockwise until
the Winder 2 is securely attached to the cam-

era base plate.

Taking the pictures

Pull up and rotate the mode selector to the
"SINGLE" or "SEQUENCE" position.

Press the shutter release.

NOTE: The removed motor drive cap can be

stored in the socket cap storage positioned on the

underside of the battery holder compartment.