Olympus OM-2 - Manual (Page 39)

Attaching the Motor Drive 1
Remove the motor drive socket cap from the
camera base plate.
Insert the motor drive guide pin into the guide
pin hole on the camera base plate. Turn the
clamping screw clockwise until the Motor Drive
1 is securely attached to the camera base plate.
Attaching the M. 18V Control Grip 1
Remove the M.18V Battery Holder 1, insert
twelve 1.5V penlight (AA) size batteries into
the battery holder, and re-insert the battery
holder into the Control Grip.
Align the red index line, and push the control
grip forward until it snaps into the front of
the motor drive.
NOTE: A flat-type rechargeable power source,
the M. 1 5V Ni-Cd Control Pack 1, is also available.
38