Onkyo PR-SC5508 - Manual (Page 75)

75
En
Multi Zone
In addition to your main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And,
you can select a different source for each room.
Zone 2 speakers must be connected to an amp in Zone 2.
Connecting Your Zone 2 Speakers
You can enjoy 2-channel stereo playback in Zone 2 and a
different source to those selected for your main room and
Zone 3.
Note
• With the default settings, the Zone 2 volume must be set on the
Zone 2 amp. If your Zone 2 amp has no volume control, set the
“Zone 2 Out” setting to “Variable” so that you can set the
Zone 2 volume on the AV controller (
➔ 76).
Zone 2 Video Output
The AV controller features a composite video output for
connection to a TV in Zone 2, so you can enjoy both audio
and video in that zone.
• If you use the COMPONENT VIDEO ZONE 2 OUT,
you must set the “Zone 2 Component Out” setting to
“Use” (
➔
77).
Note
• The ZONE 2 OUT V jack outputs video from components con-
nected to composite video only.
• If you use the ZONE 2 OUT, you must set the “Zone 2 Com-
ponent Out” setting to “Use” ( ➔ 77). The ZONE 2 OUT out-
puts video only from components connected to component video
inputs.
Connecting Zone 2
Hookup
• Use an RCA audio cable to connect the AV controller’s PRE
OUT ZONE 2 L/R jacks to an analog audio input on your
Zone 2 amp.
• Use an RCA audio cable to connect the AV controller’s PRE
OUT ZONE 2 SUBWOOFER jack to the line input on a
powered subwoofer in Zone 2.
• Connect your Zone 2 speakers to the speaker terminals on
your Zone 2 amp.
R L
IN
LINE INPUT
Main room
Zone 2
AV controller
Powered subwoofer
Receiver/
integrated amp
Multichannel power amp
Hookup
• Use a composite video cable to connect the AV controller’s
ZONE 2 OUT V jack to a composite video input on your
Zone 2 TV.
• Alternatively, use a component video cable to connect the AV
controller’s COMPONENT VIDEO ZONE 2 OUT jacks to
a component video input on your Zone 2 TV.
Main room
TV
Zone 2
AV controller
TV