Onkyo PR-SC5508 - Manual (Page 17)

17
En
Connecting a Balanced Audio Source
You can connect a balanced audio source to the AV controller’s BALANCE L/R INPUT jacks by using two XLR audio
cables. To use the balanced input, you must assign it to an input selector (
➔ 47). If you connect a mono source, use the
BALANCE L INPUT jack and set the “Input Channel” setting to “Mono(L)” ( ➔ 47). The AV controller’s balanced
INPUT jacks are wired as shown.
1 2
3
Stereo audio source with
balanced XLR output