Onkyo PR-SC5508 - Manual (Page 25)

25
En
Turning On & Basic Operations
Turning On/Off the AV Controller
(European and Asian models)
To completely shut down the AV controller, set POWER to the OFF position (
).
Turning On
1
(European and Asian models)
Set
POWER to the ON position ( ) on the front panel.
The AV controller enters Standby mode, and the STANDBY indicator comes on.
2
Press ON/STANDBY on the front panel.
or
Press RECEIVER followed by ON on the remote controller.
The AV controller comes on, the display lights, and the STANDBY indicator goes off.
Pressing the remote controller’s ON again will turn on any components connected via .
Turning Off
Press ON/STANDBY on the front panel.
or
Press RECEIVER followed by STANDBY on the remote controller.
The AV controller will enter Standby mode. To prevent any loud surprises when you turn on the AV controller,
always turn down the volume before you turn it off.
STANDBY
ON
RECEIVER
ON/STANDBY ON/STANDBY
POWER
STANDBY indicator
(North American models)
STANDBY indicator
(European and Asian models)