Onkyo PR-SC5508 - Manual (Page 102)

102
En
Using an RIHD-compatible TV, Player, or Recorder
, which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo
components. The AV controller can be used with CEC (Consumer Electronics Control), which allows system control
over HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however,
operation with components other than
-compatible components cannot be guaranteed.
■
About -compatible components
The following components are -compatible. (As
of February 2010) See the Onkyo web site for latest infor-
mation.
TV
• Panasonic VIERA Link compatible TV
• Toshiba REGZA-LINK compatible TV
• Sharp TV (See Onkyo web site for latest information on
compatible models.)
Players/Recorders
• Onkyo and Integra -compatible players
• Panasonic VIERA Link compatible players and record-
ers (only when used together with Panasonic VIERA
Link compatible TV)
• Toshiba REGZA-LINK compatible players and record-
ers (only when used together with Toshiba REGZA-
LINK compatible TV)
• Sharp players and recorders (only when used together
with Sharp TV)
* Models other than those mentioned above may have some
interoperability if compatible with CEC which is part of the
HDMI Standard, but operation cannot be guaranteed.
Note
• Do not connect the -compatible component more than
the following number to the HDMI input terminal so that the
linked operations work properly.
–Blu-ray Disc/DVD player is up to three.
–Blu-ray Disc recorder/DVD recorder/Digital Video Recorder is
up to three.
–Cable/Satellite Set-top box is up to four.
• Do not connect the AV controller to the other AV controller/AV
amplifier via HDMI.
• When the -compatible component more than the
above-mentioned is connected, the linked operations are not
guaranteed.
■
Operations that can be performed with
connection
For -compatible TV
The following linked operation is possible by connecting
the AV controller to an
-compatible TV.
• The AV controller will enter Standby mode when the
power of the TV is turned to Standby.
• You can set on the menu screen of the TV to either out-
put the audio from the speakers connected to the AV
controller, or from the speakers of the TV.
• It is possible to output the video/audio from the antenna
or from the input jack of the TV from the speakers con-
nected to the AV controller. (A connection such as opti-
cal digital cable or similar is required above the HDMI
cable.)
• Input to the AV controller can be selected with the
remote controller of the TV.
• Operations such as volume adjustment or similar for the
AV controller can be performed from the remote control-
ler of the TV.
For -compatible players/recorders
The following link operation is possible by connecting the
AV controller to an
-compatible player/recorder.
• When the playback is started on the player/recorder,
input of the AV controller will switch to the HDMI input
of the player/recorder that is playing back.
• Operation of the player/recorder is possible with the
remote controller supplied with the AV controller.
* Not all functions may operate depending on the model.