Onkyo PR-SC5508 - Manual (Page 59)

59
En
Main menu Miscellaneous
Volume Setup
■ Volume Display
`
Absolute:
Display range is “Min”, “0.5” through “99.5”,
“Max”.
` Relative(THX):
Display range is “– dB”, “–81.5dB” through
“+18.0dB”.
With this setting, you can choose how the volume level is
displayed.
The absolute value 82 is equivalent to the relative value
0 dB.
■ Muting Level
` – dB (fully muted), –50dB to –10dB in 10 dB steps.
This setting determines how much the output is muted
when the muting function is used (
➔ 27).
■ Maximum Volume
`
Off, 50 to 99 (Absolute display)
` Off, –32dB to +17dB (Relative display)
With this setting, you can limit the maximum volume.
To disable this setting, select “Off”.
■ Power On Volume
` Last, Min, 1 to 99 or Max (Absolute display)
` Last , – dB, –81dB to +18dB (Relative display)
With this preference, you can specify the volume set-
ting to be used each time the AV controller is turned
on.
To use the same volume level that was used when the AV
controller was turned off, select “Last”.
The “Power On Volume” cannot be set higher than the
“Maximum Volume” setting.
■
Headphone Level
` –12dB to 0dB to +12dB
With this preference, you can specify the headphone vol-
ume relative to the main volume. This is useful if there’s a
volume difference between your speakers and your head-
phones.
OSD Setup
■
On Screen Display
This preference determines whether operation details
are displayed on-screen when an AV controller function
is adjusted.
`
On:
Displayed.
` Off:
Not displayed.
Even when “On” is selected, operation details may not be
output if the input source is connected to an HDMI IN.
■ TV Format (European and Asian models)
For the on-screen setup menus to display properly, you
must specify the TV system used in your area.
` Auto:
Select this to automatically detect the TV system
from the video input signals.
` NTSC:
Select this if the TV system in your area is NTSC.
`
PAL:
Select this if the TV system in your area is PAL.
■ Language
` English, Deutsch, Français, Español, Italiano,
Nederlands, Svenska,
This setting determines the language used for the on-
screen setup menus.
12V Trigger A/B/C Setup
See “Using the 12V Triggers” (
➔
79).
Miscellaneous