Oregon Scientific SE120 User Manual

Page 18

POWER
Watch
Chest belt
OPERATING ENVIRONMENT
Operation
temperature
Storage
temperature

1 x CR2032 3V lithium battery
1 x CR2032 3V lithium battery

5°C to 40°C (41°F to 104°F)

-20°C to 70°C (-4°F to 158°F)

WARNINGS

To ensure you use your product correctly and safely,
read these warnings and the entire user manual before
using the product. The warnings given here provide
important safety information and should be observed
at all times.

• The product is a precision instrument. Never attempt

to take this device apart. Contact the retailer or our
customer service department if the product requires
servicing.

• Do not touch the exposed electronic circuitry, as there

is a danger of electric shock.

• Take precautions when handling all battery types.
• Remove the batteries before storing the product for a

long period of time.

• Do not use the chest belt in aircrafts or hospitals.

The use of radio frequency products can cause

malfunctions in the control devices of other
equipment.

• Do not bend or stretch the transmitter part of the

chest belt.

• Check all major functions if the device has not been

used for a long time. Maintain regular internal testing
and cleaning of your device.

• Do not dispose this product as unsorted municipal

waste. Collection of such waste separately for special
treatment is necessary.

• Clean the watch and chest belt thoroughly after each

training session. Never store the products when wet.

• Use a soft, slightly moistened cloth to clean the

product. Do not use abrasive or corrosive cleaning
agents, as these may scratch the plastic parts and
corrode the electronic circuit.

• Avoid pressing the keys with wet fingers, under water,

or in heavy rain, as this may allow water to gain entry
into the electrical circuitry.

• Do not subject the product to excessive force, shock,

dust, temperature changes, or humidity. Never
expose the product to direct sunlight for extended
periods. Such treatment may result in malfunction,
a shorter electronic life span, damaged batteries, or
distorted parts.

• Do not tamper with the internal components. Doing

so will terminate the product warranty and may cause
damage. The main unit contains no user-serviceable
parts.

• Do not scratch hard objects against the LCD display

as this may cause damage.

SE120_M_EN_R7

2006.4.12, 10:53 AM