RCA RCU900 - Manual (Page 5)

5
Setup Routine and Procedures
The SETUP key is located towards the middle of the RCU900
unit, on the right-hand side of the rubber keypad. The SETUP
key is used to walk you through the steps in setting up the
remote. To enter the Setup Mode, press and hold the SETUP key
until the LED indicator light remains on. At that time, the Main
Setup Screen appears. Setup is used for Library Code Entry,
Code Search, Code Identification and other functions.
During a Setup function, if no button is pressed for 60 seconds,
the unit automatically exits from the Setup process. The LED
indicator light flashes an error in this instance, and any
operation that is not completed when the time-out occurs is
not programmed.
During the Setup function, if you press any key not shown on
the touchscreen or a key not expected as part of a Setup routine,
the RCU900 ignores that keypress. Pressing the LCD CLEAR key
in a Setup routine returns the touchscreen to the Main Setup
Screen. When you press the CLEAR key, any changes made up
to that point are discarded. Also, where specifically indicated,
pressing the SETUP key in a Setup routine discards any changes
and returns the remote to the Main Setup Screen.
To exit the Setup function and return to normal operation, press
the CLEAR key on the Main Setup Screen.
RCU900_IB_revC.qxp 12/19/02 9:50 AM Page 5