beautypg.com

RCA RCR4383 User Manual

Universal remote control owner's manual, Four-component universal remote, Programming your remote

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

RCR4283 / RCR4383

Universal Remote Control
Owner's Manual

Manual del Propietario (parte posterior)

INFO key

displays

information

for the

component

you’re

controlling

Transport

keys,

including

SKIP and

SLOW, give

you better

DVD/DVR

control

Component

keys (TV.

SAT*CBL,

DVD-VCR.

DVR-AUX)

Dedicated -

MENU and

GUIDE

keys let

you access

advanced

component

functicKis

0

0

®

Actual

mode/ may

vary from

picture

shown

The INPUT and — (dash) key has three

funaions: (1) it toggles through all the video

sources connected to your TV; (2) when the

remote is in VCR mode, this button toggles

between VCR and the TV Input; (3) when

you're entering digital channel numbers

directly, this button lets you separate the main

channel number from the subchannel number

Care and Maintenance

• Keep the remote dry. if it gets wet. wipe it dry Immediately.

• Use and store the remote only in normal tenrtperature

environments.

• Handle the remote gently arwl carefully. Don't drop it

• Keep the rentóte away from dust and dirt.

• Wipe the remote with a damp cloth occasionally to keep it

locking new.

• Modifying or tampering with the remote's irrternal components

can cause malfunction and invalidate its warranty.

Four-Component
Universal Remote

Cbngraiuüúons on youx purchase of this four-component
universal remote. This tmiscnal remote controls up to lour
electronic compfmmts and makes fugglmg, remote controls
a chmg of the past. Your remote ts guaranteed to work with
all brands of components. This remote is unusoaOy versatile
because ir has

a

DVR«AUX key that you can piognm to conooi

any \*idco component. The four-compODent onivenal temóte is
easy

TO

use, easy to program and gives you control

at

the touch

of your fingertips,

SAVE THIS MANUAL AND THECODE LISTS!
Rfmair comtroh can umeitMUS lou tbeir proffommin^ wbotyou
dbaitff dk kattents, suxtycu ¡utf the manual and code lists in
a ud'e place so that you can reprogram the remote ^'ytm need to.

Tip: The four-component universal remote is alrea^ programnud
to operate most RCA, GE tvtd PROSCAN branded T\>% VCRs,
DVD players and satellite receivers, just press the corresponding
kjy-DVD*VCRjor a DVD player, TV jin a television, SAT*CBL

for a satellite receiver. DVR»AUXfor a DVft

Battery Installation and Information

Your universal remote requires two A\A alkaline batteries
(batteries may or may not be included, depending on model).

1b install the batteries:

1. Press and push the battery

oHnpaitment cover to remove it.

2. Insert the batteries matching die

batteries to the (4-) and (-) marks

inside the battery compartment

3. I\ish the battery cover back into place.

Note: Ij'you are replacing batteries, tjy not to press any buttons efier

you’ve taken the old halteries out. Pressing buttons while replacing

batteries causes the remote to lose the devices you Vv programmed. You
will need to program the remote again.

Battery Prccautíons:

Do not mix .aid and new oaUerm,
Do not mix alkaline, standard(carhon-r.hic) orreSargahk (niekel-

cadmium) batteries.

Always remente old, weak or worn-out batteries prompt^ and ruyde or

dispose of them in accordance with Local and National Regulations.

Battery Saver

Your universal remote control saves battery power by
aulomaiically turning off if any key is pressed for more than
60 seconds. This saves your battery lire should your remote
gel stuck in a place where the keys remain depressed, such as
between sofa cushions.

Programming Your Remote

Your universal remote can operate a vaneiy oi brands ot
components. In order for your universal remote to control your
components, you need to program the remote with the codes
that match the components (See Code Lists enclosed or go to
rca.com/codcfinder). These code^s enable the remote to
communicate with your components. Each brand and each
component has its own “language,” and, by programming the
correct codes into your remote, you ttU the remote to “speak the
same language' as your components.