RCA RCU900 - Manual (Page 22)

2 2
Method 1 (continued)
4. Press and release the numeric keys indicating the
number of minutes (01-99) you wish to set on the
Sleep Timer. The LED indicator light blinks once to
indicate acceptance of the keypress and the screen
returns to normal operation.
5. The Sleep Timer is now set.
6. When using the Sleep Timer feature, leave the remote
pointing towards the TV with an unobstructed path.
TV or Audio Volume
Punch-Through
Notes
• To cancel the Sleep Timer, press and release the ON•OFF key
on the rubber keypad in TV Mode or press and hold the
LCD SLEEP key in TV Screen 2 until the remote beeps twice.
The LED indicator light blinks once to indicate acceptance of
the keypress.
• The Sleep Timer settings are cleared when you enter Setup
using the SETUP key on the rubber keypad. The Sleep Timer
is also cleared when you enter the Macro Activation Screen.
• You can return to normal operation any time without setting
the Sleep Timer by pressing the LCD CLEAR key.
Method 2 (From Setup Routine)
To set your Sleep Timer from the Setup routine, follow
these steps:
1. Press the TV device key on the
rubber keypad.
2. Press and hold the SETUP key on
the rubber keypad until the LED
indicator light remains on and the
touchscreen shows the Main Setup
Screen. This process takes
approximately 2-3 seconds.
3. Release the SETUP key.
4. Press and release the SLEEP key. The
LED indicator light blinks once to
indicate acceptance of the keypress.
5. The touchscreen now shows the
Sleep Setup Screen. Press and release
the numeric keys indicating the
number of minutes (01-99) you wish
to set on the Sleep Timer. The LED
indicator light blinks once to indicate
acceptance of the keypress and the
screen returns to normal operation.
6. The Sleep Timer is now set.
7. When using the Sleep Timer feature,
leave the remote pointing towards
the TV with an unobstructed path.
Your RCU900’s Punch-through command allows you to choose
which device mode (either TV or AUDIO/AUX) controls the
VOL+
, VOL-, and MUTE keys on the rubber keypad. With this
feature, your TV volume can work even when you are in VCR
Mode, because it “punches through” from one device to another.
RCU900_IB_revC.qxp 12/19/02 9:50 AM Page 22