RCA RCU900 - Manual (Page 27)

MENU
The LCD MENU key brings up the Main Menu. If you are already in the
menu system, press the LCD OK or MENU keys to select a highlighted
choice. Use the LCD NAVIGATION keys (UP, DOWN, LEFT, and RIGHT
ARROW
keys) to move through the menu selections.
Note: With some brands, the CH+ and CH- and VOL+ and VOL- keys on the
rubber keypad navigate through the highlighted choices. Once you select a
device key, you put the remote in that device mode and it will remain in
that mode until you press another device key. When you put the remote in
a specific device mode, the menu that is activated on the touchscreen will
be the menu for that mode. For example, if you put the remote in TV Mode,
the menu you see on the touchscreen is for the TV Mode.
MUTE
The LCD MUTE key mutes the volume on your device with
volume control.
NAVIGATION KEYS & OK KEY
Use the LCD NAVIGATION keys (UP, DOWN, LEFT, and RIGHT
ARROW
keys) to move through the on-screen menu and guides. The
NAVIGATION keys may also be used to move through the highlighted
choices. The LCD OK key chooses the highlighted choice.
Note: With some manufactured models, the LCD MENU or ENTER key
should be used to select the highlighted choices.
PIP & SWAP
The LCD Picture-in-Picture (PIP) and SWAP keys operate your TV’s
Picture-in-Picture features.
PREVIOUS CHANNEL (PREV CH)
The PREV CH key on the rubber keypad lets you access the previous
channel you selected. It operates the same way as the LAST CHANNEL
or RECALL keys do on many remotes.
PUNCH-THROUGH
A Punch-through command has the ability to punch-through from one
device to another, (e.g., the TV volume can work while the remote is in
the VCR Mode).
SETUP KEY
The SETUP key on the rubber keypad is used to walk you through the
steps in setting up the remote. Setup is used for Library Code Entry,
Code Search, Code Identification and other functions. During a Setup
function, if no button is pressed for 60 seconds, the unit automatically
exits from the Setup routine.
SLEEP KEY
The LCD SLEEP key allows you to turn your TV off
automatically at a predetermined time.
SLEEP TIMER
The Sleep Timer allows you to program your TV to turn off after a period
of time (from one to 99 minutes). The LCD SLEEP key is used to set the
Sleep Timer and is only available in the main TV Mode.
SMART MACRO
The Smart Macro function, when programmed, causes a series of events
to occur in sequential order. Pressing the LCD MACRO key activates a
screen that allows you to select any of your programmed Macros. An
example of a Macro sequence could be “Turn on the TV; then set it to
channel 3; then turn on the satellite receiver; then set it to Channel 57.”
You can program and store nine Smart Macros, with each consisting of
up to 20 commands.
TRANSPORT KEYS
The transport keys are located on the rubber keypad. Transport keys include
the REVERSE, PLAY, FORWARD, RECORD, STOP and PAUSE keys.
TV/VCR
The LCD TV/VCR key operates the TV/VCR function of your VCR.
VOLUME AND CHANNEL KEYS
The VOLUME and CHANNEL keys (VOL+, VOL-, CH+, and CH- keys)
on the rubber keypad increase and decrease the volume level and
channel numbers.
Note: With some brands, these keys also navigate through
highlighted choices in Menu Mode.
2 7
RCU900_IB_revC.qxp 12/19/02 9:50 AM Page 27