RCA RCU900 - Manual (Page 12)

Key Label Options
1 2
With the RCU900, you have the ability to customize
individual keys and key label segments to meet your needs.
It is recommended that the Key Label Options feature only be
used after you have finished programming all your devices. This
feature lets you select preset key options to be shown on the
touchscreen. You can change any LCD panel key except the
SCREEN
, LEARN and MACRO keys. Any one of the available
label options can be chosen for each key. You can also choose to
show only the key frame or hide the key completely.
To choose preset key label options for LCD keys, follow
these steps:
TV CODE
Code Identification Chart
Enter your codes here for easy reference:
VCR CODE
SAT/CBL CODE
DVD CODE
AUX 1 device: AUDIO
Tuner ❒ AMP ❒
Tape ❒
1. Press and hold the SETUP key on
the rubber keypad until the LED
indicator light remains on and the
touchscreen shows the Main Setup
Screen. This process takes
approximately 2-3 seconds.
2. Release the SETUP key.
3. Press and release the LCD SCREEN
key. The LED indicator light blinks
once to indicate acceptance of
the keypress.
Code Identification (continued)
one second each, followed by a 0.5
second gap where no digits are
shown. The LED indicator light
blinks once for each digit display. The
sequence is completed once and then
the touchscreen returns to the Main
Setup Screen.
7. The Code Identification process is
now complete. You can write this
Code ID in the Code ID Chart for
easy reference.
AUX 2 device:
CD CODE
RCU900_IB_revC.qxp 12/19/02 9:50 AM Page 12