RCA RCU900 - Manual (Page 21)

Delete a Smart Macro
To delete a previously programmed Smart Macro, follow
these steps:
2 1
1. Press and hold the SETUP key on
the rubber keypad until the LED
indicator light remains on and the
touchscreen shows the Main
Setup Screen. This process takes
approximately 2-3 seconds.
2. Release the SETUP key.
3. Press and hold the LCD MACRO
key until Macro Setup Screen 7 is
shown. The LED indicator light blinks
once to indicate acceptance of the
keypress. Release the LCD MACRO
key. Only the programmed Macro key
numbers will be shown.
4. Press and release the digit key for the
Macro you wish to delete. The LED
indicator light blinks once to
indicate acceptance of the keypress.
5. The Macro deletion is complete and
the Main Setup Screen will be shown.
6. Press LCD CLEAR on the Main
Setup Screen to exit Setup Mode.
7. If you are in the process of deleting
a Smart Macro and you decide
not to delete it, you can abort the
deletion process by pressing the
LCD CLEAR key.
Sleep Timer
Love to go to sleep with the TV on in the background? With the
RCU900, you can program your TV to turn off after a period of
time (from one to 99 minutes). The LCD SLEEP key is used to
set the Sleep Timer and is only available in the main TV Mode.
The SLEEP key is not displayed for any mode other than TV.
The TV Off command is sent at the end of the time period to
turn the TV off. You can set the Sleep Timer in two ways.
Method 1 (From Normal Operation)
To set your Sleep Timer from normal operation, follow
these steps:
4. If keypress beep is enabled, you will
hear a series of beeps as the Macro
executes. The number of beeps will
correspond to the number of Learned
commands within the Macro.
1. Press the TV device key on the
rubber keypad.
2. Press the LCD SCREEN key to
switch to the second TV screen on
the touchscreen, which shows the
LCD SLEEP key.
3. Press and hold the LCD SLEEP key
in TV Screen 2 until the LED
indicator light remains on and the
touchscreen shows the Sleep Setup
Screen. This process takes
approximately 2-3 seconds.
RCU900_IB_revC.qxp 12/19/02 9:50 AM Page 21