Runco QUANTUM Q-750D - Manual (Page 79)

Operation
Q-750d Series Installation/Operation Manual 63
PRE
L
IMINAR
Y
Table 4-3 lists the x- and y-coordinates for each primary and secondary color component.
• PCE: To use the Personal Color Equalizer to define a custom color gamut, choose the
“PCE” Color Gamut setting (refer to Color Gamut on page 62). Then, choose PCE
from the Display Color menu and press ENTER.
Table 4-3. x/y Color Gamut Values
Primary
Color
Color Gamut Settings and Associated x/y Values
REC709 SMPTE “C” EBU DCI
x y x y x y x y
Red 0.640 0.330 0.635 0.340 0.640 0.330 0.680 0.320
Yellow 0.419 0.505 0.421 0.506 0.418 0.502 0.425 0.548
Green 0.300 0.600 0.305 0.595 0.290 0.600 0.265 0.690
Cyan 0.225 0.329 0.228 0.326 0.220 0.329 0.205 0.360
Blue 0.150 0.060 0.155 0.070 0.150 0.060 0.150 0.060
Magenta 0.321 0.154 0.318 0.162 0.328 0.158 0.342 0.154
The DHD Controller uses the PCE settings for all display modes on
a given input.
Note