Roland RP201 - Manual (Page 44)

46
Connecting to Other Devices
If you connect the RP201 to powered speakers or to an audio system that has line input jacks, you’ll be able to hear the RP201’s sound from your
powered speakers or audio system.
If you connect your digital audio player or other audio playback device to the RP201, you’ll be able to hear its sound via the RP201.
Use phone plug audio cables (sold separately) to make connections.
fig.RP201Audio1-e.eps
1. Turn the volume all the way down on the RP201 and on
the device you’re about to connect.
2. Turn off the power to the RP201 and connected powered
speakers.
3. Use audio cables (sold separately) to make the
connection.
4. Switch on the RP201.
5. Switch on the connected powered speakers.
6. Adjust the volume level on the RP201 and the connected
powered speakers.
When you play the RP201’s keyboard, the sound is played from the
connected powered speakers.
Turning Off the Power
1. Turn the volume all the way down on the RP201 and on
the powered speakers you’re about to connect.
2. Turn off the connected powered speakers.
3. Turn off the RP201.
fig.RP201Audio2-e.eps
1. Turn the volume all the way down on the RP201 and on
the audio player you’re about to connect.
2. Turn off the power to the RP201 and connected audio
player.
3. Use audio cables (sold separately) to make the
connection.
4. Switch on the connected audio player.
5. Switch on the RP201.
6. Adjust the volume level on the RP201 and the connected
audio player.
The sounds from the connected audio player are played by the
RP201.
Adjust the volume by using the controls of your audio player.
Turning Off the Power
1. Turn the volume all the way down on the RP201 and on
the audio player you’re about to connect.
2. Turn off the RP201.
3. Turn off the connected audio player.
Connecting to Audio Equipment
926a
* When connection cables with resistors are used, the volume level of equipment connected to the input jacks may be low. If this happens, use
connection cables that do not contain resistors.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before
making any connections.
Connecting Amplified Speakers to the
RP201
Output jacks
(1/4” phone plug) Amplified speakers,
Audio system, etc.
Input (Line In)
Playing Sounds of an Audio Player through
the RP201
Digital audio player,
Audio system, etc.
Output (Line Out)
Input jacks
(1/4” phone plug)
RP-201_e.book 46 ページ ２００９年１１月２０日 金曜日 午後２時３分