Erasing recorded performances – Roland RP201 User Manual
Page 29
31
Recording
7.
Press the [–] button.
You will return to the beginning of the performance you recorded.
8.
Press the [
] button.
The recorded performance will play back.
If you press the [
] button while the metronome is sounding,
there will be a two-measure count (“count-in”) before playback
begins.
9.
Press the [
] button once again to stop playback.
The recorded performance will disappear when you turn off
the power. If you want to keep the performance you recorded,
you must save it in internal memory. Refer to “Saving Songs”
If you have not saved the performance you recorded, you
won’t be able to play back another song. You’ll have to erase
(p. 31) or save (p. 32) the performance before playing back
another song.
You can erase recorded performances.
fig.RecordButtonz.eps
1.
Press the [Song] button a number of times until the
indication “USr.” is displayed.
fig.d-USrdotExp-e.eps
2.
Press the [+] button.
“dEL” will start blinking in the display.
fig.d-dEL.eps
If you decide not to delete the song, press the [
] button.
3.
Press the [
] button.
The recorded performance is erased.
A performance you recorded will be deleted when you turn off
the power.
Erasing Recorded Performances
Lit if there is a recorded song
RP-201_e.book 31 ページ ２００９年１１月２０日 金曜日 午後２時３分