Listening through headphones, Using the headphone hook, P. 20) – Roland RP201 User Manual

Page 18: Of headphones simultaneously (p. 20), On the headphone hook (p. 20)

Before You Play

You can use headphones to enjoy the RP201 without disturbing

those around you, such as at night.

Since the RP201 has two headphone jacks, two people can also use

headphones simultaneously.

If you’re using only one set of headphones, you may connect them

to either of the two headphone jacks.

fig.Headphones.eps

Plug the headphones into the headphones jack located

at the left of the RP201’s bottom panel.

If headphones are connected, no sound will be output from the

RP201’s speakers.

headphone volume.

Cautions when Using Headphones

• To prevent damage to the cord’s internal conductors, avoid rough

handling. When using headphones, mainly try to handle either the

plug or the headset.

• Your headphones may be damaged if the volume of a device is

already turned up when you plug them in. Minimize the volume

before you plug in the headphones.

• Excessive input will not only damage your hearing, but may also

strain the headphones. Please enjoy music at an appropriate

volume.

• Use headphones that have a stereo 1/4” phone plug.

Whenever you are not using the headphones, you can hang them

on the headphone hook of the RP201.

Attaching the Headphone Hook

Press and twist the headphone hook included with the

RP201 into the hole in the bottom left of the RP201 (refer

to the figure below).

Turn the headphone hook wing nut to secure the

headphone hook.

fig.Bottom-hook.eps

Do not hang anything other than headphones on the

headphone hook. Doing so may damage the instrument or the

hook.

Listening through Headphones

Headphones

Using the Headphone Hook

Headphone hook

Wing nut

RP-201_e.book 20 ページ２００９年１１月２０日　金曜日　午後２時３分